Decision Making Business Essay

The cognitive process of selecting a course of action from among multiple alternatives. Common examples include shopping, deciding what to eat, and deciding who or what to vote for in an election or referendum.

Decision making is said to be a psychological construct. This means that although we can never “see” a decision, we can infer from observable behavior that a decision has been made. Therefore we conclude that a psychological event that we call “decision making” has occurred. It is a construction that imputes commitment to action. That is, based on observable actions, we assume that people have made a commitment to effect the action.

Decision making is an important part of many professions, where specialists apply their expertise in a given area to making informed decisions. For example, medical decision making often involves making a diagnosis and selecting an appropriate treatment.

Due to the large number of considerations involved in many decisions, decision support systems have been developed to assist decision makers in considering the implications of various courses of action. They can help reduce the risk of errors.

WHAT IS DECISION MAKING?

SOME DEFINITIONS

“Decision making is the study of identifying and choosing alternatives based on the values and preferences of the decision maker”.

Making a decision implies that there are alternative choices to be considered, and in such a case we want not only to identify as many of these alternatives as possible but to choose the one that

(1) Has the highest probability of success or effectiveness and

(2) Best fits with our goals, desires, lifestyle, values, and so on.

“Decision making is the process of sufficiently reducing uncertainty and doubt about alternatives to allow a reasonable choice to be made from among them”.

This definition stresses the information-gathering function of decision making. It should be noted here that uncertainty is reduced rather than eliminated. Very few decisions are made with absolute certainty because complete knowledge about all the alternatives is seldom possible. Thus, every decision involves a certain amount of risk. If there is no uncertainty, you do not have a decision; you have an algorithm–a set of steps or a recipe that is followed to bring about a fixed result.

KINDS OF DECISIONS

There are several basic kinds of decisions.

Decisions whether.

This is the yes/no, either/or decision that must be made before we proceed with the selection of an alternative. Should I buy a new TV? Should I travel this summer? Decisions whether are made by weighing reasons pro and con. The PMI technique discussed in the next chapter is ideal for this kind of decision.

It is important to be aware of having made a decision whether, since too often we assume that decision making begins with the identification of alternatives, assuming that the decision to choose one has already been made.

Decisions which.

These decisions involve a choice of one or more alternatives from among a set of possibilities, the choice being based on how well each alternative measures up to a set of predefined criteria.

Contingent decisions.

These are decisions that have been made but put on hold until some condition is met.

For example, I have decided to buy that car if I can get it for the right price; I have decided to write that article if I can work the necessary time for it into my schedule. OR even, We’ll take the route through the valley if we can control the ridge and if we detect no enemy activity to the north.

DECISION MAKING STYLE

The following are the most common types of decision making styles that a manager in a business or even a common man might have to follow.

Irreversible:

These decisions are permanent. Once taken, they can’t be undone. The effects of these decisions can be felt for a long time to come. Such decisions are taken when there is no other option.

Reversible:

Reversible decisions are not final and binding. In fact, they can be changed entirely at any point of time. It allows one to acknowledge mistakes and fresh decisions can be taken depending upon the new circumstances.

Delayed:

Such decisions are put on hold until the decision maker thinks that the right time has come. The wait might make one miss the right opportunity that can cause some loss, especially in the case of businesses. However, such decisions give one enough time to collect all information required and to organize all the factors in the correct way.

Quick Decisions:

These decisions enable one to make maximum of the opportunity available at hand. However, only a good decision maker can take decisions that are instantaneous as well as correct. In order to be able to take the right decision within a short span of time, one should also take the long-term results into consideration.

Experimental:

One of the different types of decision making is the experimental type in which the final decision cannot be taken until the preliminary results appear and are positive. This approach is used when one is sure of the final destination but is not convinced of the course to be taken.

Trial and Error:

This approach involves trying out a certain course of action. If the result is positive it is followed further, if not, then a fresh course is adopted. Such a trail and error method is continued until the decision maker finally arrives at a course of action that convinces him of success. This allows a manager to change and adjust his plans until the final commitment is made.

Conditional:

Conditional decisions allow an individual to keep all his options open. He sticks to one decision so long as the circumstances remain the same. Once the competitor makes a new move, conditional decisions allow a person to take up a different course of action.

CATEGORIES OF DECISION MAKING

Rational

These are by far and away the most common and when many people think of decision making, they typically consider some kind of rational model. The general idea here is to weigh up the pros and cons, and work out the most sensible, logical option. There are usually a series of steps involved and these are done one after the other.

These models often involve plugging information into a graph or chart. This information usually includes facts as well as assumptions. And the scoring method is designed to produce the optimal decision.

Intuitive

The second main category is the intuitive models. These models do not depend on reason and logic. The choice is reached usually by an intuitive ‘knowing’ of what the best answer is. People talk about ‘feeling it in their gut’, ‘listening to their heart’ and receiving visions or hearing voices.

Combining

Of course, there are combinations of the above. Gary Klein’s recognition primed decision making model uses the information in the environment and the inner senses in a very particular way. He believes that we naturally make up to 95% of our decisions this way.

A further refinement of his model, is the decision making model put forward in this website. A good place to start to read more about this is in how to make a decision.

DECISION MAKING IS A RECURSIVE PROCESS

A critical factor that decision theorists sometimes neglect to emphasize is that in spite of the way the process is presented on paper, decision making is a nonlinear, recursive process. That is, most decisions are made by moving back and forth between the choice of criteria (the characteristics we want our choice to meet) and the identification of alternatives (the possibilities we can choose from among). The alternatives available influence the criteria we apply to them, and similarly the criteria we establish influence the alternatives we will consider. Let’s look at an example to clarify this.

Suppose someone wants to decide, Should I get married? Notice that this is a decision whether. A linear approach to decision making would be to decide this question by weighing the reasons pro and con (what are the benefits and drawbacks of getting married) and then to move to the next part of the process, the identification of criteria (supportive, easy going, competent, affectionate, etc.). Next, we would identify alternatives likely to have these criteria (Kathy, Jennifer, Michelle, Julie, etc.). Finally we would evaluate each alternative according to the criteria and choose the one that best meets the criteria. We would thus have a scheme like this:

decision whether … select criteria … identify alternatives … match criteria to alternatives … make choice

However, the fact is that our decision whether to get married may really be a contingent decision. “I’ll get married if I can find the right person.” It will thus be influenced by the identification of alternatives, which we usually think of as a later step in the process. Similarly, suppose we have arrived at the “identify alternatives” stage of the process when we discover that Jennifer (one of the girls identified as an alternative) has a wonderful personality characteristic that we had not even thought of before, but that we now really want to have in a wife. We immediately add that characteristic to our criteria. Thus, the decision making process continues to move back and forth, around and around as it progresses in what will eventually be a linear direction but which in its actual workings is highly recursive.

COMPONENTS OF DECISION MAKING

The Decision Environment

Every decision is made within a decision environment, which is defined as the collection of information, alternatives, values, and preferences available at the time of the decision. An ideal decision environment would include all possible information, all of it accurate, and every possible alternative. However, both information and alternatives are constrained because the time and effort to gain information or identify alternatives are limited. The time constraint simply means that a decision must be made by a certain time. The effort constraint reflects the limits of manpower, money, and priorities. (You wouldn’t want to spend three hours and half a tank of gas trying to find the very best parking place at the mall.) Since decisions must be made within this constrained environment, we can say that the major challenge of decision making is uncertainty, and a major goal of decision analysis is to reduce uncertainty. We can almost never have all information needed to make a decision with certainty, so most decisions involve an undeniable amount of risk.

The fact that decisions must be made within a limiting decision environment suggests two things. First, it explains why hindsight is so much more accurate and better at making decisions that foresight. As time passes, the decision environment continues to grow and expand. New information and new alternatives appear–even after the decision must be made. Armed with new information after the fact, the hindsighters can many times look back and make a much better decision than the original maker, because the decision environment has continued to expand.

The second thing suggested by the decision-within-an-environment idea follows from the above point. Since the decision environment continues to expand as time passes, it is often advisable to put off making a decision until close to the deadline. Information and alternatives continue to grow as time passes, so to have access to the most information and to the best alternatives, do not make the decision too soon. Now, since we are dealing with real life, it is obvious that some alternatives might no longer be available if too much time passes; that is a tension we have to work with, a tension that helps to shape the cutoff date for the decision.

Delaying a decision as long as reasonably possible, then, provides three benefits:

1. The decision environment will be larger, providing more information. There is also time for more thoughtful and extended analysis.

2. New alternatives might be recognized or created. Version 2.0 might be released.

3. The decision maker’s preferences might change. With further thought, wisdom, and maturity, you may decide not to buy car X and instead to buy car Y.

And delaying a decision involves several risks:

1. As the decision environment continues to grow, the decision maker might become overwhelmed with too much information and either make a poorer decision or else face decision paralysis.

2. Some alternatives might become unavailable because of events occurring during the delay. In a few cases, where the decision was between two alternatives (attack the pass or circle around behind the large rock), both alternatives might become unavailable, leaving the decision maker with nothing. And we have all had the experience of seeing some amazing bargain only to hesitate and find that when we go back to buy the item, it is sold out.

3. In a competitive environment, a faster rival might make the decision and gain advantage. Another manufacturer might bring a similar product to market before you (because that company didn’t delay the decision) or the opposing army might have seized the pass while the other army was “letting the decision environment grow.”

The Effects of Quantity on Decision Making

Many decision makers have a tendency to seek more information than required to make a good decision. When too much information is sought and obtained, one or more of several problems can arise.

(1) A delay in the decision occurs because of the time required to obtain and process the extra information. This delay could impair the effectiveness of the decision or solution.

(2) Information overload will occur. In this state, so much information is available that decision-making ability actually declines because the information in its entirety can no longer be managed or assessed appropriately. A major problem caused by information overload is forgetfulness. When too much information is taken into memory, especially in a short period of time, some of the information (often that received early on) will be pushed out.

(3) Selective use of the information will occur. That is, the decision maker will choose from among all the information available only those facts which support a preconceived solution or position.

(4) Mental fatigue occurs, which results in slower work or poor quality work.

(5) Decision fatigue occurs where the decision maker tires of making decisions. Often the result is fast, careless decisions or even decision paralysis–no decisions are made at all.

The quantity of information that can be processed by the human mind is limited. Unless information is consciously selected, processing will be biased toward the first part of the information received. After that, the mind tires and begins to ignore subsequent information or forget earlier information. (Have you ever gone shopping for something where you looked at many alternatives–cars, knives, phones, TVs–only to decide that you liked the first one best?)

Decision Streams

A common misconception about decision making is that decisions are made in isolation from each other: you gather information, explore alternatives, and make a choice, without regard to anything that has gone before. The fact is, decisions are made in a context of other decisions. The typical metaphor used to explain this is that of a stream. There is a stream of decisions surrounding a given decision, many decisions made earlier have led up to this decision and made it both possible and limited. Many other decisions will follow from it.

Another way to describe this situation is to say that most decisions involve a choice from a group of preselected alternatives, made available to us from the universe of alternatives by the previous decisions we have made. Previous decisions have “activated” or “made operable” certain alternatives and “deactivated” or “made inoperable” others.

For example, when you decide to go to the park, your decision has been enabled by many previous decisions. You had to decide to live near the park; you had to decide to buy a car or learn about bus routes, and so on. And your previous decisions have constrained your subsequent ones: you can’t decide to go to a park this afternoon if it is three states away. By deciding to live where you do, you have both enabled and disabled a whole series of other decisions.

As another example, when you enter a store to buy a DVD player or TV, you are faced with the preselected alternatives stocked by the store. There may be 200 models available in the universe of models, but you will be choosing from, say, only a dozen. In this case, your decision has been constrained by the decisions made by others about which models to carry.

We might say, then, that every decision

(1) follows from previous decisions,

(2) Enables many future decisions, and

(3) Prevents other future decisions.

People who have trouble making decisions are sometimes trapped by the constraining nature of decision making. Every decision you make precludes other decisions, and therefore might be said to cause a loss of freedom. If you decide to marry Terry, you no longer can decide to marry Shawn. However, just as making a decision causes a loss of freedom, it also creates new freedom, new choices and new possibilities. So making a decision is liberating as well as constraining. And a decision left unmade will often result in a decision by default or a decision being made for you.

It is important to realize that every decision you make affects the decision stream and the collections of alternatives available to you both immediately and in the future. In other words, decisions have far reaching consequences.

CONCEPTS

Information.

This is knowledge about the decision, the effects of its alternatives, the probability of each alternative, and so forth. A major point to make here is that while substantial information is desirable, the statement that “the more information, the better” is not true. Too much information can actually reduce the quality of a decision. See the discussion on The Effects of Quantity on Decision Making above.

2. Alternatives.

These are the possibilities one has to choose from. Alternatives can be identified (that is, searched for and located) or even developed (created where they did not previously exist). Merely searching for preexisting alternatives will result in less effective decision making.

3. Criteria.

These are the characteristics or requirements that each alternative must possess to a greater or lesser extent. Usually the alternatives are rated on how well they possess each criterion. For example, alternative Toyota ranks an 8 on the criterion of economy, while alternative Buick ranks a 6 on the same criterion.

4. Goals.

What is it you want to accomplish? Strangely enough, many decision makers collect a bunch of alternatives (say cars to buy or people to marry) and then ask, “Which should I choose?” without thinking first of what their goals are, what overall objective they want to achieve. Next time you find yourself asking, “What should I do? What should I choose?” ask yourself first, “What are my goals?”

A component of goal identification should be included in every instance of decision analysis.

5. Value.

Value refers to how desirable a particular outcome is, the value of the alternative, whether in dollars, satisfaction, or other benefit.

6. Preferences.

These reflect the philosophy and moral hierarchy of the decision maker. We could say that they are the decision maker’s “values,” but that might be confusing with the other use of the word, above. If we could use that word here, we would say that personal values dictate preferences. Some people prefer excitement to calmness, certainty to risk, efficiency to esthetics, quality to quantity, and so on. Thus, when one person chooses to ride the wildest roller coaster in the park and another chooses a mild ride, both may be making good decisions, if based on their individual preferences.

7. Decision Quality.

This is a rating of whether a decision is good or bad. A good decision is a logical one based on the available information and reflecting the preferences of the decision maker.

The important concept to grasp here is that the quality of a decision is not related to its outcome: a good decision can have either a good or a bad outcome. Similarly, a bad decision (one not based on adequate information or not reflecting the decision maker’s preferences) can still have a good outcome.

For example, if you do extensive analysis and carefully decide on a certain investment based on what you know about its risks and your preferences, then your decision is a good one, even though you may lose money on the investment. Similarly, if you throw a dart at a listing of stocks and buy the one the dart hits, your decision is a bad one, even though the stock may go up in value.

Good decisions that result in bad outcomes should thus not be cause for guilt or recrimination. If you decide to take the scenic route based on what you know of the road (reasonably safe, not heavily traveled) and your preferences (minimal risk, prefer scenery over early arrival), then your decision is a good one, even though you might happen to get in an accident, or have a flat tire in the middle of nowhere. It is not justified to say, “Well, this was a bad decision.”

In judging the quality of a decision, in addition to the concerns of logic, use of information and alternatives, three other considerations come into play:

A. The decision must meet the stated objectives most thoroughly and completely. How well does the alternative chosen meet the goals identified?

B. The decision must meet the stated objectives most efficiently, with concern over cost, energy, side effects. Are there negative consequences to the alternative that make that choice less desirable? We sometimes overlook this consideration in our search for thrills.

C. The decision must take into account valuable byproducts or indirect advantages. A new employee candidate may also have extra abilities not directly related to the job but valuable to the company nonetheless. These should be taken into account.

8. Acceptance.

Those who must implement the decision or who will be affected by it must accept it both intellectually and emotionally.

Acceptance is a critical factor because it occasionally conflicts with one of the quality criteria. In such cases, the best thing to do may be to choose a lesser quality solution that has greater acceptance.

For example, when cake mixes first were put on the market, manufacturers put everything into the mix–the highest quality and most efficient solution. Only water had to be added. However, the mixes didn’t sell well–they weren’t accepted. After investigation, the makers discovered that women didn’t like the mixes because using the mixes made them feel guilty: they weren’t good wives because they were taking a shortcut to making a cake. The solution was to take the egg and sometimes the milk out of the mix so that the women would have something to do to “make” the cake other than just adding water. Now they had to add egg and perhaps milk, making them feel more useful. The need to feel useful and a contributor is one of the most basic of human needs. Thus, while the new solution was less efficient in theoretical terms, it was much more acceptable. Cake mixes with the new formula became quite popular.

Thus, the inferior method may produce greater results if the inferior one has greater support. One of the most important considerations in decision making, then, is the people factor. Always consider a decision in light of the people implementation.

A decision that may be technologically brilliant but that is sociologically stupid will not work. Only decisions that are implemented, and implemented with thoroughness (and preferably enthusiasm) will work the way they are intended to.

APPROACHES TO DECISION MAKING

There are two major approaches to decision making in an organization, the authoritarian method in which an executive figure makes a decision for the group and the group method in which the group decides what to do.

1. Authoritarian. The manager makes the decision based on the knowledge he can gather. He then must explain the decision to the group and gain their acceptance of it. In some studies, the time breakdown for a typical operating decision is something like this: make decision, 5 min.; explain decision, 30 min.; gain acceptance, 30 min.

2. Group. The group shares ideas and analyses, and agrees upon a decision to implement. Studies show that the group often has values, feelings, and reactions quite different from those the manager supposes they have. No one knows the group and its tastes and preferences as well as the group itself. And, interestingly, the time breakdown is something like this: group makes decision, 30 min.; explain decision, 0 min.; gain acceptance, 0 min.

Clearly, just from an efficiency standpoint, group decision making is better. More than this, it has been shown many times that people prefer to implement the ideas they themselves think of. They will work harder and more energetically to implement their own idea than they would to implement an idea imposed on them by others. We all have a love for our own ideas and solutions, and we will always work harder on a solution supported by our own vision and our own ego than we will on a solution we have little creative involvement with.

There are two types of group decision making sessions. First is free discussion in which the problem is simply put on the table for the group to talk about. For example, Joe has been offered a job change from shift supervisor to maintenance foreman. Should he take the job?

The other kind of group decision making is developmental discussion or structured discussion. Here the problem is broken down into steps, smaller parts with specific goals. For example, instead of asking generally whether Joe should take the job, the group works on sub questions: What are Joe’s skills? What skills does the new job require? How does Joe rate on each of the skills required? Notice that these questions seek specific information rather than more general impressionistic opinions.

Developmental discussion (1) insures systematic coverage of a topic and (2) insures that all members of the group are talking about the same aspect of the problem at the same time.

SOME DECISION MAKING STRATEGIES

As you know, there are often many solutions to a given problem, and the decision maker’s task is to choose one of them. The task of choosing can be as simple or as complex as the importance of the decision warrants, and the number and quality of alternatives can also be adjusted according to importance, time, resources and so on. There are several strategies used for choosing. Among them are the following:

1. Optimizing. This is the strategy of choosing the best possible solution to the problem, discovering as many alternatives as possible and choosing the very best. How thoroughly optimizing can be done is dependent on

A. importance of the problem

B. time available for solving it

C. cost involved with alternative solutions

D. availability of resources, knowledge

E. personal psychology, values

Note that the collection of complete information and the consideration of all alternatives is seldom possible for most major decisions, so that limitations must be placed on alternatives.

2. Satisficing. In this strategy, the first satisfactory alternative is chosen rather than the best alternative. If you are very hungry, you might choose to stop at the first decent looking restaurant in the next town rather than attempting to choose the best restaurant from among all (the optimizing strategy). The word satisficing was coined by combining satisfactory and sufficient. For many small decisions, such as where to park, what to drink, which pen to use, which tie to wear, and so on, the satisficing strategy is perfect.

3. Maximax. This stands for “maximize the maximums.” This strategy focuses on evaluating and then choosing the alternatives based on their maximum possible payoff. This is sometimes described as the strategy of the optimist, because favorable outcomes and high potentials are the areas of concern. It is a good strategy for use when risk taking is most acceptable, when the go-for-broke philosophy is reigning freely.

4. Maximin. This stands for “maximize the minimums.” In this strategy, that of the pessimist, the worst possible outcome of each decision is considered and the decision with the highest minimum is chosen. The Maximin orientation is good when the consequences of a failed decision are particularly harmful or undesirable. Maximin concentrates on the salvage value of a decision, or of the guaranteed return of the decision. It’s the philosophy behind the saying, “A bird in the hand is worth two in the bush.”

Quiz shows exploit the uncertainty many people feel when they are not quite sure whether to go with a maximax strategy or a maximin one: “Okay, Mrs. Freen, you can now choose to take what you’ve already won and go home, or risk losing it all and find out what’s behind door number three.”

Example: I could put my $10,000 in a genetic engineering company, and if it creates and patents a new bacteria that helps plants resist frost, I could make $50,000. But I could also lose the whole $10,000. But if I invest in a soap company, I might make only $20,000, but if the company goes completely broke and gets liquidated, I’ll still get back $7,000 of my investment, based on its book value.

Example: It’s fourth down and ten yards to go on your twenty yard line. Do you go for a long pass or punt? Maximax would be to pass; Maximin would be to punt.

DECISION MAKING PROCEDURE

As you read this procedure, remember our discussion earlier about the recursive nature of decision making. In a typical decision making situation, as you move from step to step here, you will probably find yourself moving back and forth also.

1. Identify the decision to be made together with the goals it should achieve. Determine the scope and limitations of the decision. Is the new job to be permanent or temporary or is that not yet known (thus requiring another decision later)? Is the new package for the product to be put into all markets or just into a test market? How might the scope of the decision be changed–that is, what are its possible parameters?

When thinking about the decision, be sure to include a clarification of goals: We must decide whom to hire for our new secretary, one who will be able to create an efficient and organized office. Or, We must decide where to go on vacation, where we can relax and get some rest from the fast pace of society.

2. Get the facts. But remember that you cannot get all the facts. Get as many facts as possible about a decision within the limits of time imposed on you and your ability to process them, but remember that virtually every decision must be made in partial ignorance. Lack of complete information must not be allowed to paralyze your decision. A decision based on partial knowledge is usually better than not making the decision when a decision is really needed. The proverb that “any decision is better than no decision,” while perhaps extreme, shows the importance of choosing. When you are racing toward a bridge support, you must decide to turn away to the right or to the left. Which way you turn is less important than the fact that you do indeed turn.

As part of your collection of facts, list your feelings, hunches, and intuitive urges. Many decisions must ultimately rely on or be influenced by intuition because of the remaining degree of uncertainty involved in the situation.

Also as part of your collection of facts, consult those who will be affected by and who will have to implement your decision. Input from these people not only helps supply you with information and help in making the decision but it begins to produce the acceptance necessary in the implementers because they feel that they are part of the decision making process. As Russell Ackoff noted in The Art of Problem Solving, not consulting people involved in a decision is often perceived as an act of aggression.

3. Develop alternatives. Make a list of all the possible choices you have, including the choice of doing nothing. Not choosing one of the candidates or one of the building sites is in itself a decision. Often a non decision is harmful as we mentioned above–not choosing to turn either right or left is to choose to drive into the bridge. But sometimes the decision to do nothing is useful or at least better than the alternatives, so it should always be consciously included in the decision making process.

Also be sure to think about not just identifying available alternatives but creating alternatives that don’t yet exist. For example, if you want to choose which major to pursue in college, think not only of the available ones in the catalog, but of designing your own course of study.

RISKING

Because making decisions involves a degree of risk, it would be helpful to examine risk and risk analysis in order to gain an understanding of what is involved. Risk and uncertainty create anxiety, yet they are necessary components of an active life.

General Comments on Risk Taking

1. Only the risk takers are truly free. All decisions of consequence involve risk. Without taking risks, you cannot grow or improve or even live.

2. There is really no such thing as permanent security in anything on earth. Not taking risks is really not more secure than taking them, for your present state can always be changed without action on your part. If you don’t take the risk of dying by driving to the store, your house could collapse on you and kill you anyway.

3. You are supposed to be afraid when you risk. Admit your fears–of loss, of rejection, of failure.

4. Risking normally involves a degree of separation anxiety–the anxiety you feel whenever you are removed from something that makes you feel secure. Many children feel this when they first leave their parents for school. Some college students feel this when they go off to college. Travelers sometimes feel it when they get homesick. The way to overcome separation anxiety is to build a bridge between the familiar and secure and the new. Find out what the new place–school or country–is like and how its elements compare to familiar and secure things at home. Take familiar things with you–books, teddy bear, popcorn popper, whatever.

The same is true of all risks. Make the opportunity as familiar as possible and learn as much about it as you can before you release the security of the old. Find out about the new job, its location, the lifestyle of those who live there, and so on.

DECISION MAKING STAGES

There are four stages that should be involved in all group decision making. These stages, or sometimes called phases, are important for the decision-making process to begin:

Orientation stage- This phase is where members meet for the first time and start to get to know each other.

Conflict stage- Once group members become familiar with each other, disputes, little fights and arguments occur. Group members eventually work it out.

Emergence stage- The group begins to clear up vague in opinions is talked about.

Reinforcement stage- Members finally make a decision, while justifying themselves that it was the right decision.

IMPORTANCE OF DECISION MAKING

Life is full of choices at every moment of time. There are multitude of possibilities in front of you to choose from. You need to choose one course of action from all available options based on your judgment. That is what constitutes making a decision. If you think about it, life is a series of decisions and consequences that follow them. Smart decisions are the triumphs of judgment while bad decisions are opportunities to learn from and rectify our strategy. The importance of decision making in life is immense as what we eventually become is a consequence of the decisions we made in the past. We are what our choices and decisions make us to be. In the text that follows I’ll identify the importance of decision making skills in leadership, business, management and running an organization.

Importance of Decision Making in Leadership

Leadership is perhaps one of the toughest tasks ever because a leader makes decisions for all his followers. The fate of all followers is entwined with the decisions that a leader makes for them. He is the leader because of his higher level of understanding and experience. He must choose what is best for all his followers and then his own self. The fact that they trust his judgment puts immense responsibility on his shoulders. There are many types of decision making processes that one can adopt.

Who can know the importance of decision making, better than a leader? The leader’s respect is heightened when the decisions he makes are validated by the test of time to be the best ones under the circumstances. He must consider all variables and possible paths to attain a collective objective and choose the one with highest success rate. His ability to study and observe situations deeply helps him in choosing the right path. He must trust his ability and soundness of reason when making a decision. Becoming a leader of men is the ultimate test of character!

Importance of Decision Making in Management

Management is not just about taking care of businesses or corporations. It is a broad concept applied to every sphere that we are a part of, extending from the self and expanding through family, community and ultimately society. It starts with personal management skills. All of management boils down to two things which are creation of effective strategy and its execution. In short, it is all about making decisions and seeing them through to their end through execution.

Every decision made by the management of a business affects employee morale and performance, ultimately influencing the overall business performance. Management is all about getting things done in the most efficient manner. Every management decision needs to be made while making most judicious use of resources at disposal with economical use of the time factor. The importance of decision making in management is immense as business policy and culture adopted, ultimately affects a company’s output and performance.

Importance of Decision Making in Business

The fate of any business venture is decided by the decision making ability of the business leadership, at the helm. They are the ones who captain and steer the ship to its destination. Profiting in a business is all about making the most of a window of opportunity that appears in a market place. Timing is of essence in business. Quick decisions on the spot, need to be made by business managers to take advantage of opportunities when they present themselves.

You can’t mull over decisions for too long. In today’s world, one needs business managers who can take snap decisions and execute the outlined strategy, despite obstacles. Sometimes, a loss or profit for a business boils down to one deciding moment of judgment! That is what business is all about, a combination of effective strategy executed with painstaking precision.

Importance of Decision Making in an Organization

The decision making ability of the think tank of any organization, be it the local city council or United Nations, decides how effective a role it will play in the world. Many organizations exist for the sake of existing and despite phenomenal amount of resources available at their disposal, they hardly do any work. That is because there is no will or decision making ability at the helm. An organization without people, who can’t make decisions and take them to their logical conclusion is doomed. However, when there is a decision making will power, with tenacity to execute strategy, miracles can happen despite limited resources. That’s why, importance of decision making in any organization, can never be overemphasized.

The way to get better at making smarter decisions is learning from experience and not repeating the same mistakes again. No decision is perfect in the sense that no decision can guarantee a 100% success rate in attainment of objective. However, you must choose the best course of action that has highest chance of success and is backed by logic and confidence in your own judgment. Decisions may turn out to be good or bad but none of them are wasted. Bad or good ones, both add up to what we call wisdom if they are analyzed in the aftermath. One often realizes the importance of decision making only after making a couple of bad ones! Don’t avoid making decisions on your own. Every decision that you make for yourself is an opportunity to grow and learn.

Order Now