Fmcg Industry And Outsourcing Information Technology Essay

FMCG industry, conversely also called as Consumer packaged goods industry. Fast Moving Consumer Goods are those fragile consumables which are usually consumed by the consumers at a regular interval. Prime activities of FMCG industry belong to selling, marketing, financing, purchasing, etc but the industry also betrothed in operations, supply chain, production and general management.

FMCG industry provides a wide range of daily consumable products and consequently the amount of money circulated against FMCG products is also very high. Competition among FMCG companies is also mounting and as a result of this, investment in FMCG industry is also greater than ever, particularly in India, where FMCG industry is regarded as the fourth largest sector with total market size of US$13.1 billion which is estimated to grow 60% by 2010. FMCG industry is considered as the largest segment in New Zealand which accounts for 5% of the country Gross Domestic Product.

FMCG product categories include Packaged food and dairy products, Hair and body care products, glassware and paper products, pharmaceuticals, consumer electronics, plastic goods, printing and stationery, household products, photography, drinks etc. and some of the examples of FMCG products are soap, detergent, shampoos, coffee, tea, dry cells, greeting cards, gifts, tobacco and cigarettes, watches etc. Well known FMCG companies are Nestlé, Reckitt Benckiser, Unilever, Procter & Gamble, L’Oreal, Coca-Cola, Carlsberg, Kleenex, General Mills, Pepsi and Mars etc.

The purpose of this topic is to investigate the relationship between the factors that affect the outsourcing decisions in FMCG industry of Pakistan. There are higher trends seen in the market for outsourcing in many FMCG companies but still it is reflecting as there are a number of factors which inhibit the FMCG companies to make outsourcing decisions.

Outsourcing occurs as a result of intimate acquaintance between subcontractors and managing departments. Outsourcers want to decrease the cost of production and the cost of management by distributing work to avoid other costs such as wages and compensation. However, outsourcing helps society by decreasing unemployment, making the economy grow and decreasing social problems.

Outsourcing is also a way to boost the economy and it helps producing industries to survive in the market. However, it is not a guarantee that the producing industries will survive. It is just one of the devices that FMCG’s should use in management, but it depends on managerial efficiency in the industries. If FMCG’s want to survive in the age of globalization, they have to adopt management techniques suitable for each situation in order to survive in the current industrial climate.

Nowadays, macroeconomics and microeconomics have been changing very rapidly, in every region. This situation is forcing all countries in the world to adapt to competition resulting from globalization, including modifying government policies, international relations, free trade area agreements, etc. Changes are also occurring in industrial management, especially organizational management, production management and technology, delivery, and marketing management, in response to both local and international competition.

In the competitive environment of manufacturing concerns and evolving technological era, to enhance efficiency and productivity, cost remains a challenge to overall manufacturing industry to compete with rivals in providing the best total lower cost to end customers and to secure the market share in order to add value to the shareholders. To invest heavily in capital investment such as machineries, buildings and land to expand space in supporting the production operation is a burden to most companies if the return of investment is not valuably.

FMCG’s that outsource are in quest of, to recognize benefits or address one or more of the issues like Cost savings, Focus on Core, Cost restructuring, Improve quality, Knowledge, Contracting out, Operational expertise, Access to talent, Capacity management, Catalyst for change, Enhance capacity for innovation, Reduce time to market, Co modification, Risk management, Venture Capital, Tax Benefit, Scalability and Creating leisure time etc.

FMCG Industry and Outsourcing

Companies that were struggling to increase the capacity to support the ramp up demand at times were upset when there was a drastic downturn of demand cut. As a result, the sudden downturn would affect the resources and investment that were put into supporting the end customer’s demand. Team of human resources and machineries that consumed production space and being idled would increase the overhead and fixed cost, thus affecting the companies badly in their financial statements. In addition, training and development to up skill internal resource skills set in terms of running the operation effectively, bringing up technical content expert, specialist ability to perform research and development to add value, effective management and maintaining the operation would require significant investment in human resources.

Outsourcing decisions are those strategic decisions that change the operating strategy of an organization both in manufacturing and services. The most important step in any outsourcing decision is to clearly define the scope of the activities that are being considered for outsourcing versus previously in sourced.

Outsourcing becomes a basic strategy of the FMCG industry and is essential for FMCG firms to stay competitive in the global environment. From firms’ perspective, outsourcing offers several advantages, such as reducing or stabilizing overhead costs, gaining cost advantage over the competition, concentrating on core activities and organizational specializations, providing flexibility in response to changing market conditions, and reducing investment in high technology based manufacturing organizations.

Through 2004 onward business growth strategy changes and business growth was restored as the first priority for most worldwide businesses, making cost reduction the second or third priority. Ensuring business growth as well as business process speed, agility and cost reduction requires a unique mix of internal and external capabilities, skills, services and processes. Only a business-driven sourcing strategy – supported by “good-enough” sourcing execution capabilities — will guarantee successful business outcomes as well as improved performance and competitiveness.

Lack of an outsourcing strategy or relevant skills and processes to manage outsourcing relationships is the most important reason for the failure of service and manufacturing industry. Global competition, increasing regulation and inspection, the development of specific standards and the industrialization of services will raise the competitive bar for the FMCG’s services and business processes, making it compulsory for the FMCG’s to work on their core business in source & let the others do their job for you. By competing on core competencies and outsourcing non-core areas, FMCG companies achieve consistently higher performance over the globe in all fields especially manufacturing and supply chains through consistent focusing and tracking their Key performance indicators.

For any of the company to make decision for in source or outsource, it’s the company strategic decision which will make the basis for the whole in source or outsource process. For making any decision, decision maker will consider the following perspective in their mind or they must have good answers for these questions.

Determine what your company needs to or should do best – strategy driven long-term positioning

Determine how best to do things – profit driven short to intermediate term competitiveness

INSOURCING/ OUTSOURCING STRATEGIC DECISION KEY STEPS IN SERVICE BASE INDUSTRY

An executive level cross-functional decision-making process identifies core competencies and areas for internal investment.

The level of internal control required by the companies and prospective direction for operational insource/ outsource decisions are identified and analyzed based on strategic value and relative competitiveness of the company in the market.

Document complete strategic decision making process and the implementation process for the strategic decision being made as it provides closed-loop assessment for continuous improvement of the decision in the long run.

Align the implementation strategies, processes and Key performance indicators with criteria and assumptions used in strategy formulation or development and in sourcing /outsourcing decision process.

STANDARDIZED OUTSOURCING PROCESS FLOW IN FMCG INDUSTRY

Stage

Key Activities

Rough Timeline

BU Role

COE Role

Opportunity Consideration

Align on business need & gain mgmt commitment to evaluate options

Identify options to consider (e.g., internal cost savings, consolidation, off-shoring, outsourcing)

Perform Options Analysis / Size of Prize (not detailed financial analysis)

If potential for outsourcing, contact outsourcing COE for support

Evaluation Team Kick-Off

Establish small team to perform preliminary evaluation of outsourcing (Project Mgr/Business Mgr, Deal Mgr, Purchases Mgr, F&A Mgr, HR Mgr, External Rel.)

1-2 wks

Initiate Evaluation Project

Agree on top-line preferred deal parameters with OS COE (e.g., general scope boundaries, sell all vs. partial assets)

Develop Keep Price Analysis using the CBA model (COE website)

Develop preliminary project success criteria

Develop preliminary project process, timing and critical path

Consider advisory needs (e.g. external consultants, legal support)

Consider need for employee communication pre-market evaluation activity

Confirm business management alignment & support to evaluate the option

1-4 wks

Market Evaluation/Discovery

Analyze market and identify potential suppliers (e.g., market position, capabilities, potential for savings & monetization)

Develop supplier materials (cold call message & operation review presentation)

Meet with suppliers (generally worth meeting w/up to 10 or so if available)

Evaluate findings of visits and determine potential for outsourcing

RFI may go out as part of typical assessment activity

4-8 wks

Decision to Pursue Outsourcing

Refine project objectives, scope, etc. (w/knowledge of market evaluation)

Prepare recommendation to pursue outsourcing

Gain management approval per Decision Authority PRIOR to RFP

Determine the small group of suppliers to be engaged in an RFP (3-4 ideally)

Execute CDA’s with these suppliers

Expand project team (RFP leader, Legal, Administrative support, etc)

Develop communication plan & communicate to employees if not yet been done

Base Case Financials

2-3 wks

RFP Development

Draft and gain approval to RFP

Develop RFP timeline (release date, supplier engagements, site visits, submittal date)

Release RFP and instructions to suppliers

4-6 wks

TPO

RFP Process Execution

Perform step-by-step RFP completion process w/suppliers (e.g., RFP review session, electronic Q&A cycle, preliminary solution review)

Receive & review bids, and execute formal solution walk-thru process

Get revised bids and perform evaluation (operational, HR, financial)

4-8 wks

Downs elect Process

Develop recommendation to down select to 1 or 2 suppliers (keep 2 suppliers ideally to maintain competitive environment)

Get management agreement

1-2 wks

Due Diligence

Conduct due diligence as required (us on suppliers; suppliers on us)

1-2 wks

TPO

Final Bids

Provides suppliers with draft contract

Request Best & Final Offers (if appropriate)

1-2 wks

Negotiations and Contract Signing

Negotiate detailed price and contract terms (w/2 suppliers as long as possible)

Align on final down select

Get management approval

Finalize internal and external communication plans (with External Relations)

Sign contract and execute related communications

4-6 wks

TPO

Transition and Closing

Put full transition team in place

Execute required transition steps (including road shows, job offers, etc)

Develop and execute companion agreements in other countries

Execute closing

Prepare deal files

4-12 wks

PR Primarily Responsible Total Time Required*

SR Shared Responsibility 5 – 10 months (ex Transition)

C Contributor 6 – 12 months (w/Transition)

TPO Technical & Process Oversight

* will vary based on project scope

Problem Statement

The rapidly changing global industrial environment, cost of working capital, research and innovation, releasing key internal resources, concentrating on Core business functions, obtaining better organizational form has significant impact on outsourcing decision making in FMCG industry of Pakistan.

Hypothesis

H1: Outsourcing activities are increasing day by day in FMCG Industry of Pakistan.

H2: FMCG industries are Outsourcing in all areas of their business & not only manufacturing operation.

H3: FMCG industries are Outsourcing to reduce Operating cost.

H4: FMCG Industries are outsourcing to increase concentration on their core business.

H5: FMCG Industries are outsourcing to Improve Quality of Services.

H6: FMCG Industries are outsourcing to Acquire Specialized expertise and knowledge

H7: FMCG industries are focusing on Selective Outsourcing.

H8: FMCG industries have midterm Outsourcing contracts.

H9: FMCG industries make Outsourcing contracts with good & reputable companies.

H10: FMCG industries make Outsourcing contracts with companies that produce at lower cost.

H11: FMCG industries make Outsourcing contracts with companies that have advance technology and management experience.

H12: Losing control of the certain business is the major concern in FMCG industries to make Outsourcing contracts.

H13: Increasing dependence with outsourcers is the major concern in FMCG industries to make Outsourcing contracts.

H14: Difficult to bring in source after conflicts is the major concern in FMCG industries to make Outsourcing contracts.

H15: Disclosure of commercial secrets is the major concern in FMCG industries to make Outsourcing contracts.

H16: Conflict of Interest with outsourcing partner is the major concern in FMCG industries to make Outsourcing contracts.

Outline of the Study

The research structure based on five chapters as follows:

Introduction about the Outsourcing and FMCG industry.

The literature review had provided theoretical background of the research and cites author had previously researched on the topic of factors affecting outsourcing decision

The research methods chapter included method of data collection, statistical technique and hypothesis development.

The results chapter had included findings and interpretation of the results.

The conclusion, discussions, implications and recommendation section provided the final logical analysis.

Definitions

Outsourcing

Outsourcing is an agreement in which any task; operation, job or process that could be performed by employees within an organization, but is instead contracted to a third party for a significant period of time-one Company provides services for another company that could also be or usually have been provided in-house.

FMCG’s

It is an acronym for Fast Moving Consumer Goods.

It is defined as “fast selling, low unit value consumer products normally in universal demand”. It includes categories like foods, soft drinks, toiletries, cosmetics and other non-durables.

CHAPTER 2: LITERATURE REVIEW

Most of the companies that were struggling to increase the capacity to support the ramp up demand at times were upset when there was a drastic downturn of demand cut. As a result, the sudden downturn would affect the resources and investment that were put into supporting the end customer’s demand. Team of human resources and machineries that consumed production space and being idled would increase the overhead and fixed cost, thus affecting the companies badly in their financial statements. In addition, training and development to up skill internal resource skills set in terms of running the operation effectively, bringing up technical content expert, specialist ability to perform research and development to add value, effective management and maintaining the operation would require significant investment in human resources (David Mackey and Kaye Thorne, 2003).

Thus, most of the companies started to explore opportunities to reduce cost and to improve profit margin in order to maintain competitive edge in the market. One of the identified opportunities was to outsource non-core business functions to external service providers at a lower operating cost. Outsourcing decisions are those strategic decisions that change the operations strategy of an organization both in manufacturing and services. The most important step in any outsourcing decision is to clearly define the scope of the operations that are being considered for outsourcing (Cook, Mary, F. and Gildner, Scoot B. 2008).

Human resource professionals throughout the world are being asked to do more or less, to enhance productivity while controlling costs and to find out new ways to increase profitability. (Uddin, Gazi, M. 2005).

Outsourcing is not a new notion. For decades, jobs have been migrated from other part of the countries namely American and European countries as well as other overseas countries to global service providers primarily India, China, Singapore and Malaysia due to lower operating cost. According to Cynthia A. Kroll (2004), a regional economist from University of California Berkeley, the recent wave of outsourcing affected a different mix of jobs, at different wage levels. It was not confined only to a small set of industries but cut across all industrial sectors in new geographic area rapidly (Cynthia A. Kroll, 2004). William P. DiMartini (2005), Senior Vice President at SunGard Availability Services said businesses in all industry segments found that limited internal resources would make outsourcing an attractive, cost-effective and prudent option that would allow them to focus on their core competencies (AccountingWEB.com, 2005).

Demand for outsourcing is a result of demand for organizational products by the target audience. On the basis of organizational estimate of total turnover, practicing managers can attempt to establish the nature and type of outsourcing required to that esteemed goal (Uddin, Gazi M. 2005).

Outsourcing advantages to name a few include lower operating cost, improve competitiveness, low in capital investment, shift resources to focus on core functions, generate demand for new growth and market segment, access to world class capability, sharing risks and make capital funds available for core business investment. Bangladesh is a least developed country, basically an agrarian economy, having around 24 million acres of cultivated land, employing about 14.5 million cultivators. Manufacturing industries have grown around Dhaka and Chittagong based on agriculture input of jute, cotton, chemical and gas based industries.

Industrial production growth has averaged more than 6% over the last 5 years. The export sector has been the engine of industrial growth, with ready-made garments leading the way, having grown at an average of 30% over the last 5 years. Primary products constitute less than 10 percent of the country’s exports; the bulk of exports are manufactured/processed products, ready-made garments and knit wears in particular. (www.euroitx.com)

There are many manufacturing concerns in Bangladesh that are looking into outsourcing opportunity to reduce cost and to overcome the internal limitations and achieve lower cost of operation. The country is now moving towards industry based economy from the agro-based one. Hence, this study was an attempt to access determinants influencing the outsourcing decision and to research the manufacturing concern in Bangladesh on how well the factors would influence the manufacturing industry in Bangladesh to outsource certain function of their business areas to external service providers. The study also aimed at finding out the influencing factors that influenced the companies in outsourcing decision and helped the companies to overcome the internal limitation barriers.

In the early 1980s, ‘outsourcing’ typically referred to the situation while organizations expanded their purchases of manufactured physical inputs, like car companies that purchased window cranks and seat fabrics from outside the firm rather than making them inside. Nowadays, outsourcing took on a different meaning. Presently it refers to a specific segment of the growing international trade. This segment consists of arm’s-length, or what Bhagvati (1984) called ‘long-distance’ purchase of services abroad, principally, but not necessarily, via electronic mediums such as the telephone, fax and the Internet. Outsourcing can happen both though transactions by firms, like phone call centers staffed in Bangalore to sen7e customers in New York and X-rays transmitted digitally from Boston to be read in Bombay, or with direct consumption purchases by individuals, like when someone hires an offshore firm to provide plans for redesigning or redecorating a living room (Bhagwati, J. et al. 2004)

In an era of rapid technological change and short product life cycles, companies were trying to reduce cost and maintain quality at the same time which implied that companies would need to specialize in what they did best and de-emphasize management attention from business processes that did not directly impact the business. Outsourcing was a means to partner with service providers so they could handle specific business processes – better, faster and at a lower operating cost (V. Krishna Polineni, 2001). It was defined as the transferring one or more internal functions of an organization to an external service providers. According to the analyst Dean Davison, the outsourcing was growing about 20 percent to 25 percent per annum (Dean Davison, 2006). Outsourcing has become an alternative, which all major corporations must consider in order to remain competitive. It helped to increase efficiency, improve service quality, accountability, values, decreased headcounts and cash infusion and gain access to world class capability and sharing risk (The Outsourcing Institute, 2006).

One of the primary advantages of outsourcing arises quickly from the reduction of overheads. This might give rise to an immediate, and possibly one-off, advantage in terms of the avoidance of future or recurrent capital outlay, and the savings in office space and equipment provisions if these could be released during the outsourcing decision. There was clearly a staff cost reduction possible here, and this could be the predominant element in directly-attributable, ongoing cost savings. The spin-off from this might benefit the business support services department where the outsourcing was partial, and could be especially useful where the capital cost was high and recurrent, particularly if there was uncertainty about the future costs of maintaining effective and competitive business support. It was an investment risk transfer, in other words. Where outsourcing is total, the benefit was accrued directly by the core business – it translated to a capital injection to the customer’s business. This was one of the major driving reasons of the outsourcing of IT provision in the early 1990s – generally agreed as having been led in 1989 by Kodak, which outsourced all of its IT operations to IBM (Jonathan Reuvid and John Hinks, 2001). This could also confer a great deal of flexibility on the company. For a centralized organization which was providing a range of its support services from its own personnel and offices, the move to outsourcing could allow a downsizing of the property commitments. Consider the impact on the organizational infrastructure requirements of a change to outsourcing IT provision, payroll and credit processing, pensions, catering, recruitment, training, Human Resource Management (HRM), cleaning, security, lettings, software development, estates and building management. It could also confer direct scope for downsizing or increased options for organizational re-structuring through property and HRM flexibility.

The transfer of a non-core service provision to a variable cost would allow economies of scale to be passed on from the supplier, and also would mean that incremental changes in the process capacity of the customer (upwards or downwards) could be covered at proportional rather than quantum cost changes. Where scope to vary the scale of the contracted supply was agreed, this has allowed the business organization to make maximum use of its marginal capital for core process change rather than non-core process support change. This could allow decreased time to market for new products or processes, and also increased scope for changes. Outsourcing solutions can provide an excellent chance to get the company service provision out of a rut and, if properly managed, to stimulate new solutions to problems from the mixing of different approaches.

A noticeable feature of the global economy is the enhancing international products. Robert Feenstra (1998) describes the remarkable international specialization in the manufacturing products. For example, the raw materials of manufacturing products like Barbie dolls (plastic and hair) are obtained from Taiwan and Japan. Assembly used to be done in those countries as well as to lower cost locations like Philippines, Indonesia, Malaysia, and China. The growth in international specialization can also be observed in aggregate statistics. William Zeile and Gorden Hanson et al (2003) document the importance of trade within multinational firms. David Hummels et al. (2003) show that trade in intermediate inputs has grown faster than trade in finished products. While the globalization of production may yield important productivity benefits, there is a widespread view that it has also adversely affected low skilled workers. There are frequent media reports on how low-skilled labors in the first world countries are hurt when manufacturing jobs are relocated in the US and in many other countries have picked up on this theme to push for greater restrictions on trade with developing countries. Yet, despite its prominence in the public debate, there is little systematic evidence of the extent to which low-skilled workers are harmed by outsourcing to poor countries (Hsieh, Chang T. and Woo, Keong T., 2005).

Outsourcing has existed in the USA for over 30 years particularly the business process outsourcing (BPO). The Bank of America, Best Buy, Delta Airlines, Goodyear, IBM, the Marriott, Motorola, PepsiCo, Procter & Gamble, and Sun Microsystems are all outsourcing HR functions. US federal and state governments also spend billions each year doing so also. HR functions are not just being outsourced, they are being sent offshore. The US companies have off-shored their manufacturing and their R&D facilities in their semiconductors, computing, chemicals and pharmaceuticals to the UK, Germany, France, Ireland and other developed countries (www.shrm.org).

In view of developing countries, outsourcing takes place more recently to India and China. In 2003, 1.5 million service jobs were outsourced to the developing world and the number was projected to surge to 4.1 million by year 2008 (El’millian Chew Saint Fey, 2005). According to the Offshore Location Attractiveness Index published by AT Kearny (2004), Malaysia, an emerging South East Asian nation, was the third most desirable location for offshore outsourcing in the world, after India and china. In Malaysia, the demand for outsourcing was not only from global multi-national companies but also from local companies. The demand for outsourcing was driven by the fact that companies could access a more reliable infrastructure that could ensure smooth core business operations at lower costs and with greater flexibility. Outsourcing also encouraged the pooling of resources for a more efficient use of resources to reap the benefits that could be derived from economies of scale. Bangladesh has potential in outsourcing in its competitive business environment with a relatively low cost structure as well as support from the government and non-government organizations. In view of outsourcing demand, Bangladesh could be very well take advantage of this fact by attracting quality outsourcing operators to the country. The availability of quality resources especially in the private sector to support the outsourcing demand, this could be made available to support off-shore and local outsourcers. HR outsourcing organizations in Bangladesh are in stage of booming up and most of the organizations have realized that they should play more attention to networking activities. Uddin, Gazi M. (2005) describes the challenges and prospects of effective HR outsourcing for managerial activities in the corporate world of Bangladesh. The study reveals that networking activities play a strong role in HR outsourcing and duration of outsourcing is temporary. The study mainly focused on HR outsourcing, not on the factors influencing outsourcing decisions.

Literature review shows that several comprehensive studies have been conducted in the world regarding outsourcing specifically HR outsourcing, general time management, managerial jobs, and managerial behavior and so on. But no significant study in the light of this research has been found. It is not claimed by the researchers that all of the literature regarding outsourcing decisions have been reviewed, but normally available literatures have been reviewed and none of them were found specifically written in the horizon of particular issue. In this research paper, the researchers would explore the extensiveness of factors influencing the outsourcing decision in the manufacturing industry of Bangladesh through the survey of the sample companies.

Outsourcing has a long-established feature of cost effective business practice. The necessity to review what to remain in house and what would be contracted to external vendors has been dramatically increased over time by two factors: the thrust for competitive advantage in the global economy and successful business focus on its core competencies (Sandra Ward, 2004). The attraction offered by significant wage differentials has therefore stimulated moves of in-house production facilities to lower wage economies, using both outsourcing and off-shoring approaches. From initial IT and software development, financial services, business process supports, the outsourcing approach was beginning to be seen in research, engineering design or development, production function and many others. The locations for off-shoring were growing especially in the Asia region such as India, China, Singapore, Malaysia and Bangladesh. Although cost savings was still a very important consideration factor (Sounders et al., 1997), companies were outsourcing for other reasons as well not only just due to lower operating cost.

According to the Outsourcing Institute executive survey (2006), the top ten reasons why companies would outsource are as follows: Reduce and control operating cost, Improve company focus, Gain access to world class capability, Free resources for other purposes, Resources are not available internally, Accelerate re-engineering benefits, Non-core function that is too complex to manage, Make capital funds available, Share risks, and Cash Infusion

There were also reasons companies outsource due to lack of technology capability, strategic advantage to the companies, better service quality vendor and sound contract, lack of internal capacity in meeting production ramp demand and also possible limited space for expansion.

However, changing economies and production methods means delivering goods from one country to another or one region to another, and using companies in other countries to produce some goods and products. Multinational companies in the U.S., UK, and Europe send some part of production to other regions where the cost of labor is lowest, or where other advantages exist in cost of production (Graf and Mudambi, 2005).

Transitions in the world economy increasingly involve the flow of intermediate goods from one country to another as multiple countries complete successive steps in a globally integrated production process. More and more firms have located different stages of production processes in different countries. Many companies in the U.S. and Europe send some part of their production to other countries such as China, Thailand, Vietnam, and India in order to reduce costs. However, although outsourcing has become important, the process is still under the auspices of one company, which therefore must consider how to use its management tools.

Because of this industrial transformation, a new phenomenon is appearing on the industrial world map. China and India are major locations for industry, and many firms have sent goods and products to these countries for further production. This industrial map changing involves changing technology and convenient communications mean we can work from different countries but still work together as if in the same place and close to each other.(Gupta and Govindarajan, 2004).

Contract manufacturing is an emerging phenomenon with industry-wide implications. Contract manufacturing refers to the recurring buyer-seller relationship at the design manufacturing interface (Sturgeon, 1999). The relationship at the design manufacturing interface is inherently interaction intensive.

Chan and Chung (2002) capture this assumption in the definition of contract manufacturing, when a provider of goods and services works collaboratively with other providers of goods and services as networked business partners to satisfy market niches by exchanging information through an inter-organizational information system.

Business process outsourcing has been an accepted business practice for more than two decades. It has shown a remarkable increase in recent years and has been a source of growth in several industrial sectors. In many countries, agreements have been made between a small number of multinational industry service suppliers and large client organizations, including central and local governments and large services and manufacturing firms. Outsourcing is the process of shifting tasks and services previously performed in-house to outside vendors (Jenster, Pedersen, Plackett, and Hussey, 2005). However, outsourcing is a common phenomenon, despite much attention being given to both globalization and regionalization, and occurs when organizations in one country contract work to another country either by creating operations in the foreign country or by contracting with an outsourcing provider (Niederman, 2005).

Outsourcing is a dynamic and recurring process that rests largely on the propositions of socio-technical theory, including open systems theory and contingency theory. Hence, it seems reasonable to assume that one static or unambiguous road map relating to outsourcing of manufacturing, which meets the requirements of every pattern, cannot be developed (Momme and Hvolby, 2001).

Thus outsourcing is a method in which management responsibility is transferred to an external organ or corporation in order to expand the core activities of the outsourcing company in fields complementary to its main activities. Outsourcing is and will remain an important method of satisfying the needs of business such as lower cost and competitiveness in the foreseeable future.

Outsourcing means the act of obtaining services from an external source, and business process outsourcing (BPO) occurs when an organization turns over the corporate environment of a particular business process or some part of production activities to a third party that specializes in that process (Brown and Wilson, 2005: 20). Business process outsourcing comprises activities in relation to management of an organization, including some part of production outside of the organization and/or third party by collaboration with a partner to produce that process for more efficiency of organization and competition (Magnezi, Dankner, Kedem, and Reuveni, 2006).

Companies such as Nike are well known in the ‘outsourcing world’ because they do not own manufacturing facilities or equipment in spite of selling a ‘physical product’ (Turner 2005). Nike chooses to outsource all its manufacturing operations, although it remains involved in the design and planning functions. Even though not all organizations are like Nike, outsourcing continues to gain popularity (de Kok 2000, Tukel and Wasti 2001, McCarthy and Anagnostou 2004). Some benefits of outsourcing are well known. They include allowing organizations to focus on their core competencies while taking advantage of the expertise and efficiency of the companies from which they outsource. Outsourcing also provides extra capacity without capital investments or hiring of personnel (Puich and Walker 2004), but outsourcing is not without its ‘costs’, including loss of control, possible higher product cost, possible reduction of flexibility, and the creation of dependency of suppliers (Humphreys et al. 2002).

Two important factors that affect outsourcing decisions are the production cost and the potential loss of customer goodwill due to late orders. This article deals with the problem of finding outsourcing strategies or solutions that consider trade-offs between outsourcing cost and average tardiness, an important measure of lost customer goodwill. Assumptions include that outsource costs are a function of machine use and that the planning organization owns no production equipment; instead, the production function is completely outsourced. Furthermore, the planning organization has flexibility in terms of the quantity of parallel production resources to outsource and it controls the assignment of jobs to these parallel production resources. The article presents lower bounds for the problem, which are used for comparisons. Several approaches to generate trade-off solutions are proposed and compared under a variety of experimental factors (RUIZ, PEZY, and WOJCIECHOWSKIX, 2006).

CHAPTER 3: RESEARCH METHODS

The chapter formed the core of the research work. The research methods chapter illustrated the detail information regarding data collection technique, sample size and also the tools that had been used in the study. The statistical tool also mentioned to give clear idea about the data collected and treatment.

3.1 Method of Data Collection

There were two types of sources available for data collection i.e. primary and secondary data source. In the research both primary and secondary data source had been used. Primary data is gathered through questionnaire & secondary data is collected through research papers / articles previously published.

3.2 Sampling Technique

The study period was consists of six years from (2004-2009). The main reason for short study period was the availability of the relevant data. Ten major banks in Pakistan were selected from total population of thirty three in the banking industry. The ten major banks covered 78% market share of Pakistan banking industry. The selection of banks made on the basis of total assets for the period ended December 31, 2009.

3.3 Sampling size

Sample size used for the study was 10 different banks on the basis of the market share. The ten major banks covered 78% market share of Pakistan banking industry. The selection of banks made on the basis of total assets for the period ended December 31, 2009.

3.4 Instrument of Data Collection

There were two types of sources available for data collection i.e. primary and secondary data. In the research secondary data was used. Secondary data was gathered from annual reports of the company and remaining data calculated by using the formula of studied variables.

3.5 Research Model Developed

ROE =Î±+Î²1CAR+â‚¬

Î± = Regression Constant – Alpha

Î² = Regression Coefficient – Beta

ROE = Return on Equity

CAR = Capital to Asset Ratio

â‚¬ = Error

3.6 Statistical Technique

The data were analyzed by using regression model to find out the impact of capital to asset ratio on return on equity.

Order Now