The Construction Of A House Or Buildings Construction Essay
In this modern world an builders faces lots of challenges in the construction of a house or buildings to compete the world in the form that how to make a modern house or building which is environment friendly, energy saving and low cost etc, such sort of problems putting pressure on builders now a days.
Because of the rising cost of the material which is used in traditional construction methods which are unlikely to meet the demands for future developments. That’s why more and more builders or designer are now understand the benefits of the development of modern material which are gradually used in the buildings now a day’s.
Housing associations are now encouraging the housing corporation to use the modern ways of construction known as modern methods of construction when building new developments. This policy is a direct result of the Government’s response to a number of drivers that have resulted in what it perceives to be a crisis in housing supply.
In areas of growth, house construction in the private sector has tended to focus on the production of traditional houses – either semi-separate family homes or larger separate executive homes. These private sector dwellings are beyond the reach of most first time buyers, particularly key-workers in comparatively low-paid jobs in the public sector. The Government is looking to housing associations to give dwellings for those who can’t afford to buy the house. The Housing Corporation is the key agency regulating
The Housing Corporation is the key agency regulating delivery of housing in the social housing sector. They assist with delivery of policy via grants awarded through the Approved Development Programme (ADP). A proportion of the ADP has been ring-fenced (The Challenge Fund) for the delivery of new homes quickly and cost effectively, in areas of high demand as well as stimulating a step change in supply by encouraging innovative forms of construction.
In the face of the support from political and regulatory authorities to make greater use of modern methods, lots of stakeholders are still unsure about modern methods of construction for some of reasons. In the case of housing associations there is doubt about whether or not modern methods are able to deliver energy efficient homes at good reasonable prices. This pamphlet aims to demonstrate that homes that cross the requirements of building regulations in sense of their material efficiency can be built cost-effectively.
SIPS
Structural insulated composite panels are one of the most satisfying technologies in the construction industry. Started in the years of 1940s when the new sandwich design concept was generated, where there were two wooden materials and a different element between them generating maximum strength to the structure.
Design
As mentioned earlier, the SIP has an insulated structure between two wooden boards. This most commonly used materials are expanded polystyrene (EPS), extruded polystyrene (XPS) or rigid polyurethane foam.
Figure : STRUCTURAL INSULATED COMPOSITE PANELS
Figure : STRUCTURAL INSULATED PANELSOther materials can also be used for example, steel, aluminium, stainless steel, fibre-reinforced plastic, and magnesium oxide.http://www.wbs-ltd.co.uk/images/photos/newbuild_mmc_sips1a.gif
Advantages
the structure is more Tougher and stronger due to the sandwich pattern of the material
More insulated than any of the materials
Less operating cost and can be used almost everywhere for eg. Roof, floor, walls etc.
Drawbacks
The manufacturing and the production can take some time
Expensive manufacturing cost
Have to prevent the composite from moister and keep it ventilated
The material creeps over time
Figure : VOLUMETRIC CONSTRUCTIONVOLUMETRIC CONSTRUCTIONhttp://www.scrapbookscrapbook.com/DAC-ART/images/hoodsinside.jpg
The volumetric construction is also, known as the modular construction. This kind of construction is mostly used at places where the employer cannot afford waste time and material for e.g. a busy road, a hospital etc.
Design
The construction components are manufactured and processed and are stacked onto prepared foundations to form dwelling. The materials used to make the components include light gauge steel frame, timber frame, concrete and composites.
Advantages
Saves time and also the labour cost.
Can reduce the waste significantly generated during construction and also comparatively the least amongst other construction methods
It is the most efficient when using identical units as it is the same common production line used.
Improved quality compared to the other construction methods
Disadvantages
Setting up a manufacturing and production line could be a major concern issue when considering cost
Transporting could be expensive depending upon the size of components
Also, installations and other factors would affect the construction workers if the components are heavy or complex structure and have to be perfectly installed
STEEL FRAME CONSTRUCTION
The steel frame construction is usually used for constructing bigger structures like building, sky scrapers etc due to its durability and toughness. The SFC is one of the most efficient construction methods which use steel beams, T shaped and I shaped beams as to resist the stresses.
Design
Figure : STEEL FRAME CONSTRUCTIONOakridge, a development of 299 dwellings for Sentinel Housing Group, utilised light gauge steel frame panellised construction for the first two phases. The homes, constructed from steel frames manufactured by Ayrshire Steel Framing, share standardised layouts – visual variety was achieved externally by incorporating a variety of physical features (such as bays, dormers and balconies) along with a variety of finishes (different coloured renders, brick and timber cladding). Dormers and balconies were also prefabricated in glass reinforced plastic (GRP).http://www.airport-technology.com/projects/raleighdurham/images/7-frame-construction.jpg
2. Advantages of Steel Frame Construction:
They can build very high and large
They are light weight and strong
They are easy to fix or assemble
They are accurate and predictable
3. Disadvantages of Steel Frame Construction:
Steel is an expensive material Frames are unstable
These types of frames needs fire protection
They needs separate “skin”
TIMBER FRAME CONSTRUCTION
Figure : TIMBER FRAME CONSTRUCTIONTimber frame is a modern method of construction that offers an important high-quality solution to the many housing and construction challenges facing the UK.As one of the leading modern methods of construction, timber frame has grown consistently year on year. It’s regarded as a means of achieving good quality, reducing time spent on-site, increasing safety and overcoming skills shortages in the industry, and will play a very important role in the formation of homes in sustainable communities by 2016.http://www.lizmale.co.uk/uploadFiles/mciFiles/Timber_frame_construction1.jpg
Design
Wood is the only renewable commercial building material and as a way of construction is effectively carbon neutral. When you use timber frame you’re actively helping to reduce the belongings of global warming. Further improved by its low embodied energy and excellent insulation properties, it means happy customers with lower heating bills and a good future for the planet.
Advantages of Timber Frame Construction
In timber frame construction needs small amount of labour.
It can be seen that the benefit in terms of time saving on site manifests itself as a saving in construction risk.
Timber frame construction is environment friendly but the environmental benefits of timber frame construction are reduced when timber is imported from sources outside non local and requiring substantial fuel consumption in transportation.
Disadvantages of Timber Frame Construction
Apparently problems with timber frame construction in the housing industry from each end users and local establishment would include a perceived huge risk of fire, problem of sound lessening in a timber structure and the impact such a structure might have on the security of the end user.
Basingstoke timber frame construction site fire
Figure : CONSTRUCTION FIRE
Timber frames are designed and manufactured to tight tolerance and require correct setting and other adjacent construction such as chimneys, rising walls and block construction. As a result, these works need to be set out with a good degree of accuracy.
Panels should be stacked on a flat surface so that warping or buckling does not happen. Proper on-site practices and skill of deliveries can address this matter.
Where housing is proposed in areas at threat of flooding, the planned construction methods undertaken need to be reviewed in order to measure the possible risks or implications should flooding occur.
BRICK and MORTAR CONSTRUCTION
Figure : BRICK AND MORTAR CONSTRUCTIONBrick is a timeless, classic building material. The Chinese, and Egyptians understood the value of this simplest of rectangular solids over three thousand years ago. Brick structures still stand that were already ancient at the time of Christ. Invented in antiquity, brick remains the one exterior building material with a human scale, rich variegated colours, and flexibility of use. Modern man has crafted building materials from concrete, plastic, glass and steel, but none approach this unique elementary product. http://www.chemexfranchises.co.uk/anglesey/images/construction.jpg
Design
The brick making process is unchanged from primitive times in its necessary elements. A modern brick plant carries out the same functions that a Babylonian craftsman once performed. That craftsman mortar and sand, mixed the two with water to form a flexible clay mass or clot, formed the clot in a wooden mould, dried the green, unfired brick in the sun, baked it to nearly 2000 degrees, and cooled the now permanent brick, which then went to the mason to be laid in mortar to become part of a temple, Great Wall, or simple home.
Figure : BRICK AND MORTAR CONSTRUCTIONAdvantages of Brick and Mortar constructionhttp://www.bandwbuilders.co.uk/ImageHandler.ashx?UploadedFile=true&image=~/App_Data/UserImages/Image/11125%20100910%20001.jpg
The bricks walls protects the houses from noises that’s comes from outside.
Bricks are beautiful when we go to the residential area we can compare the beauty of brick structure to the other structural work like steel, wood etc.
Brick structures are easy to maintain and there is nearly no cost to maintain the exterior of an all brick home.
Bricks will not burn and in those disastrous situations where a fire does occur it will certainly not fuel the situation.
Disadvantages of Brick and MORTOAR CONSTRUCTION
The one main disadvantage of bricks and mortar is the high cost of both material and labour.
Bricks and mortar construction is much sturdier than wooden homes because of the thickness, hardness and weight of the materials used to build the home
bricks and mortar construction is very old traditional construction.
ANALYSES AND EVALUATION
For the particular construction, the author supposes that the steel frame construction would be the best possible way to build the structure. As the main concern is time efficiency it would be quicker and easier to install the steel frame structure and to complete the work on time.
Talking in terms of cost efficiency and reliability, in the steel frame structure has to be compromised in one of the two factors. The demand of this kind of structure is to be tough and reliable and therefore have to spend some money on the manufacturing of the steel frames and also keeping the quality into consideration.
The manufacturing cost and the transportation cost would be the only concern issues for the company where as the labour cost would be comparatively less. As the steel frames could be easily assembled and fixed.
Architecting on the building would be easier and also it would give a freedom to the architect to design his particular construction as the steel frame could be manufactures in almost any possible way.
Method
Cost
Time efficiency
Structural reliability
Environmental friendly
sustainability
SIP
Expensive manufacturing cost and nominal labour cost
Moderate
Good
Moderate
Best
Volumetric construction
Expensive manufacturing and labour cost
Good
Moderate
Moderate
Less
Timber frame construction
Nominal cost
Less
Moderate
Less
Good
Brick and Mortar construction
Least amongst all the methods
Least
Good
Less
Less
Steel Frame Construction
Expensive manufacturing cost but cheap labour cost
Best
Best
Best
Good
SCHEDULING AND PROCEDURES
Designing
The plan starts by taking the structure into consideration. Keeping the limitations, constrains and the difficulties in mind. The Architecting Part takes place after the cost estimation and the legislations have been considered.
The designing process is a time taking process as it helps in knowing all most everything which is to be used in the construction and the quantity of materials which have to be ordered or manufactured.
Foundation
The execution starts by evacuating the area and excavating to make a foundation for the building. The foundations build is made up of cement, which is a common process for all the construction.
During the initial construction, the skeleton of the structure is build by the steel frame construction method. The steel frame construction helps in giving the toughness to the structure and also, the freedom to building almost any kind of structural shape.
The concern issues for steel frame structure are as follows:
Time delay in manufacturing and transportation
Waste parts could affect the expected budget
Construction
The method suitable with the steel frame structure is the SIPS. The Structural insulated panels can be used in making roofs, floor and also the walls. The reliability and the strength of the combination of the structures would improve the life and the toughness of the building.
Concern issues for this kind of construction method are:
Weather: it could be a serious issue and could delay the work plan, therefore the construction plan has to be well organised and executed.
Labour cost : these kind of construction methods have nominal labour cost but since it is a combination of two types of construction methods, the labour demand could be higher
Lastly, legislation: the legislations are the most important factor of concern for the employer and as well as the management.
Finishing
The finishing consists of the final construction steps like greasing, oiling, painting etc.
REFERENCE
Figure 1: modern method of construction ;
http://www.tommypopeconstruction.com/Building-Construction.htm
Date: 3rd may 2011 time: 4:00pm
Figure 2 : Modern building;
Date: 3rd may 2011 time: 4:20
Figure 3 : http://www.thermalconstruction.co.uk/about-us-1
DATE: 9th may 2011 11:41
Figure 4 : SIPS
http://www.wbs-ltd.co.uk/newbuild_mmc_sips.htm
Date: 9th may 2011 12:00
Figure 5: VOLUMETRIC CONSTRUCTION
http://www.scrapbookscrapbook.com/DAC-ART/dac-artblocks.html
Date: 10th may 2011 1:12pm
Figure 6: STEEL FRAME CONSTRUCTION
http://www.airport-technology.com/projects/raleighdurham/raleighdurham7.html
Date: 10th may 2011 1:30pm
Figure 7 : TIMBER FRAME CONSTRUCTION
http://www.lizmale.co.uk/clients-case-studies/uktfa
Date: 10th may 2011 1:35pm
Figure 8: CONSTRUCTION FIRE
http://faast.co.uk/2010/09/15/basingstoke-timber-frame-frame-fire-prompts-construction-fire-safety-warnings/
Date: 11th may 2011 2:00pm
Figure 9 : BRICK AND MORTAR CONSTRUCTION
http://www.chemexfranchises.co.uk/anglesey/construction.html
Date: 11th may 2011 2:10pm
Figure : BRICK AND MORTAR CONSTRUCTION
http://www.bandwbuilders.co.uk/blog
Date: 11th may 2011 4:00
Order Now