A Construction Crane Engineering Essay

That is the one with a tall central shaft with a long boom and counterweights. Tower cranes are often built onsite and are even affixed directly to the structure of the building, especially in the construction of very tall buildings like skyscrapers. Take a drive downtown in any growing city and you’ll see tower cranes affixed to the tops of twenty-story office buildings going up. The most common point of affixation for these cranes is the concrete elevator shaft in the center of most buildings, but other points can be used as well if necessary.

Cranes can be fixed in its position in many ways. One of them is to let a second crane, which is taller and lighter, to hoist the crane into position. Some cranes can also self assemble (e.g. Self-erecting cranes).

Buying cranes doesn’t seem to be reliable, as construction cranes and tower cranes are very expensive to buy. The renting case seems to be the most suitable one in this issue. There are many companies out there, who make their profits by renting cranes out to construction contractors.

Truck mounted cranes vary widely in price, but you could expect to pay anywhere from $20,000 to $100,000 for a good one of this category, but when we talk about a big tower crane, you should expect a bigger range than that stated above.

Although the more common option is to rent a crane, some contractors and construction companies, who work in many large-scale projects, may find it better to buy one and use it from one construction site to another.

Moreover, tower cranes can be rent or bought online nowadays; as some web sites are specially designed for this sake.

To operate a tower crane effectively and efficiently, at least two crew members should help in this operation. At the very least, you need one to provide you signals during the lifting and someone in charge of the truck’s parts.

it is important to know the capacity of your cranes. Tower cranes have built-in computers programs to help the operator in this. If the operator is lifting more weight than the capacity of the crane, the computer will alert him.

Do not forget the counterweights

Counterweights act as the support force of the machine during lifting. The counterweights’ weight is calculated using a specific formula that requires you to know the weight of the object you are lifting, nevertheless, the radius of the crane you are lifting at.

8. Crane safetyÂ

Make sure the power is cut from any nearby power lines, and make sure the surrounding area is safe and clear of people, workers and obstacles before work. Also, be well prepared for dealing with urgent emergencies; if something does happen, make sure you know exactly what you should do.

SAFETY FACTORS FOR TOWER CRANES

Site-level safety management

operator proficiency

Wind

Superintendent’s character

Maintenance management

Company-level safety management

Overlapping cranes

Operator’s character

Signalperson’s experience

Blind lifts

Type of load

Employment source (operator)

Length of work shift (operator)

SOURCE: JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, APRIL 2009, P. 316.

9. Usage

Tower cranes are considered a common fixture at major construction sites. They are used to liftÂ steel, concrete, large tools like acetylene torches and generators, and a wide variety of other heavy building materials.

10. Parts of a Tower Crane

All tower cranes consist of the same basic parts, illustrated as follows:

TheÂ baseÂ is bolted to a large concrete pad that supports the crane.

The base connects to theÂ mastÂ (orÂ tower), which gives the tower crane its vertical height.

theÂ slewing unit (gear and motor) is fixed on the top of the mast; that allows the crane to rotate

http://static.howstuffworks.com/gif/tower-crane15.jpg

Additional three parts are found on the top of the swelling unit:

The long horizontalÂ jibÂ (working arm), which is the portion of the crane that reacts against the load. A running trolley runs along the jib to move the load in and out from the crane’s center

http://static.howstuffworks.com/gif/tower-crane11.jpg

The short horizontalÂ machinery arm, which contains the crane’s motors and electronics as well as the large concreteÂ counter weights:

http://static.howstuffworks.com/gif/tower-crane14.jpg

TheÂ operator’s cab (where the operator sits and control the crane)

http://static.howstuffworks.com/gif/tower-crane6.jpg

The machinery arm contains theÂ motorÂ that lifts the load, in addition to the control electronics that drive it, and the cable drum, as shown in the following picture

http://static.howstuffworks.com/gif/tower-crane7.jpg

While the motors that rotate the gears in the slewing unit are located above the unit’s largeÂ gear

http://static.howstuffworks.com/gif/tower-crane9.jpg

12. How Much Weight Can They Lift?

A typical tower crane has the following specifications

Maximum unsupported heightÂ – 265 feet (80 meters)Â

if it is tied into the building, the crane can have a total height much greater than 265 feet.

Maximum horizontal reachÂ – 230 feet (70 meters)

Maximum lifting powerÂ – 19.8 tons (18 metric tons), (300 ton-meter)

CounterweightsÂ – 20 tons (16.3 metric tons)

It appears that the maximum load that the crane can lift is 18 metric tons (39,690 pounds), but it cannot lift that much if the load is at the far end of the jib. The closer the load to the mast, the more weight the crane can lift safely (due to the moment effects). TheÂ 300 ton-meterÂ rating tells you the relationship. For example, if the operator positions the load 30 meters (100 feet) from the mast, the crane can lift a maximum of 10 tons.

The crane uses twoÂ limit switchesÂ to keep the crane in the safe side:

TheÂ maximum-loadÂ switch; monitors the tension on the cable and makes sure that the load is less than 18 tons.

TheÂ load-momentÂ switch; makes sure that the operator does not exceed the ton-meter rating of the crane. Sometimes a cat head assemblyÂ in the slewing unit can be used to measure the amount of collapse and depreciation in the jib and sense when an overload condition occurs.

13. Why Don’t They Fall Over?

When you look at a tall tower crane, the whole thing seems outrageous — why don’t these structures fall over, especially since they haveÂ no support wiresÂ of any kind?

The first element of the tower crane’s stability is a largeÂ concrete padÂ that the construction company pours several weeks before the crane arrives. This pad typically measures 30 feet by 30 feet by 4 feet (10 x 10 x 1.3 meters) and weighs 400,000 pounds (182,000 kg) — these are the pad measurements for the crane shown here. Largeanchor boltsÂ embedded deep into this pad support the base of the crane:

http://static.howstuffworks.com/gif/tower-crane4.jpg

So these cranes are essentially bolted to the ground to ensure their stability.

14. How Do They Grow?

Tower cranes arrive at the construction site on 10 to 12 tractor-trailer rigs. The crew uses aÂ mobile craneÂ to assemble the jib and the machinery section, and places these horizontal members on a 40-foot (12-m) mast that consists of two mast sections. The mobile crane then adds theÂ counterweights.

The mast rises from this firm foundation. The mast is a large,Â triangulatedÂ lattice structure, typically 10 feet (3.2 meters) square. The triangulated structure gives the mast the strength to remain upright.

http://static.howstuffworks.com/gif/tower-crane1.jpg

http://static.howstuffworks.com/gif/tower-crane2.jpg

http://static.howstuffworks.com/gif/tower-crane3.jpg

To rise to its maximum height, the crane growsÂ itselfÂ one mast section at a time! The crew uses aÂ top climberÂ orclimbing frameÂ that fits between the slewing unit and the top of the mast. Here’s the process:

The crew hangs a weight on the jib to balance the counterweight.

The crew detaches the slewing unit from the top of the mast. LargeÂ hydraulic ramsÂ in the top climber push the slewing unit up 20 feet (6 m).

The crane operator uses the crane to lift another 20-foot mast section into the gap opened by the climbing frame. Once bolted in place, the crane is 20 feet taller!

http://static.howstuffworks.com/gif/tower-crane18.jpg

http://static.howstuffworks.com/gif/tower-crane19.jpg

Once the building is finished and it is time for the crane to come down, the process is reversed — the crane disassembles its own mast and then smaller cranes disassemble the rest.

15. Renting a Tower Crane

Most construction companies rent their tower cranes from a company likeÂ Heede Southeast. Heede ships the crane to the site, assembles it and charges a monthly fee while the crane is on the site.

The typical fee for installation and disassembly runs around $60,000. This price includes shipping the crane to the site, renting the mobile crane used to assemble the tower crane, the cost of the crew that handles the assembly, etc. A typical monthly fee for a 150-foot-tall tower crane is approximately $15,000, with an additional charge to rent the climbing frame and extra mast sections.